Serie Aria

Aria 48 [+]

The ECU is designed to exploit the chemical-physical characteristics of the gas fuel used in Otto engines while maintaining the level of emissions of the exhaust gas according to the original standard car.
The connector used in Air 48 is automotive type 48- Poles . The connection to the engine signals , offers exceptional qualities of connective security and protection against water infiltration .

Aria 48 makes a diagnosis of all gas components in real time , displaying any faults on the switch. Through the software you can diagnose and intervene on these anomalies .

Aria 48 connects with OBD ( On Board Diagnostic ) of the vehicle by exchanging information and acting actively and instantaneously Gas System optimizing the carburetion and engine efficiency .

Aria 48 is the result of years of experience in the injection gas management for phased sequential Multipoint 3-4 cylinder engines.

TECHNICAL DATA

Supply Voltage: 10 - 16 Volts CC
Working temperature: -20 / + 105 °C
Power consumption: - stand-by (key Off): < 20 mA
        - no load ready to change (key On): < 160 mA
Gas Injectors supported: 2, 3, 4
Injectors Impedance: da 2 a 16 ohm
Lock-off load on single input: 2 (Imax = 4A cad.)
Inputs for lock-off / Services: 2
Water temper. sensors supported: 4,7 - 10 kohm
Gas temper. sensors supported: 4,7 - 10 kohm
Pressure sensors supported: 4+2,5 bar Absolute
Level sensors supported: 0..5V - 1050 & 806 compatibles - 0..90 ohm
(others on demand)
Lambda sensors managed: 0-0,8 / 0-5 / 5-0 / 0,8-1,6 / 2,5-3,5 / UEGO
Lambda emulation: possible for all managed type
Change-over Switch: Pushbutton, gas level shown, operating led, ready-to-change blinking, diagnostics, Buzzer
Interface: 4 poli AMP su cablaggio per interfaccia USB o Bluetooth proprietario
Standard OBD protocols supported: CAN H/L & ISO KL

CERTIFICATIONS

  • ECE 67R-01
  • ECE 110R-00
  • ECE 10R-03

KIT CONTENT

  • 1 x ECU Unit with standard plastic box + back cover in aluminium
  • 1 x "Intelligent" change-over switch
  • 1 x pressure sensor type 4+2,5 Absolute
  • 1 x standard loom CA0315
  • 1 x fuse (7,5 A) and fuseholder bag
  • 1 x shrink tube bag (4 cyl)
  • 1 x Wiring diagram
  • Packing: 1 box per kit, 120 box in a carton, 2 cartons per pallet (extra cost will be charged if 1 pallet per carton is needed

Aria 32 [+]

Air 32 is comes from the experience gained during Aria 48 development in which there have been some changes resulting in a product with an excellent value for money . The connector used in Aria 32 is automotive type 32 poles.

Aria 32 makes a diagnosis of all gas components in real time , viewing any errors on the switching LEDs. The verification of the problems incurred can be deepened by the calibration software at any time.

The connection to the engine signals, offers exceptional qualities of connective security and protection against water infiltration.

TECHNICAL DATA

Supply Voltage: 10 - 16 Volts CC
Working temperature: -20 / + 105 °C
Power consumption: - stand-by (key Off): < 20 mA
        - no load ready to change (key On): < 160 mA
Gas Injectors supported: 2, 3, 4
Injectors Impedance: da 2 a 16 ohm
Lock-off load on single input: 2 (Imax = 4A cad.)
Inputs for lock-off / Services: 2
Water temper. sensors supported: 4,7 - 10 kohm
Gas temper. sensors supported: 4,7 - 10 kohm
Pressure sensors supported: 4+2,5 bar Absolute
Level sensors supported: 0..5V - 1050 & 806 compatibles - 0..90 ohm
(others on demand)
Lambda sensors managed: 0-0,8 / 0-5 / 5-0 / 0,8-1,6 / 2,5-3,5 / UEGO
Lambda emulation possible for all managed type
Change-over Switch: Pushbutton, gas level shown, operating led, ready-to-change blinking, diagnostics, Buzzer
Interface: 4 poles AMP on the loom for custom USB or Bluetooth interface

CERTIFICATIONS

  • ECE 67R-01
  • ECE 110R-00
  • ECE 10R-03

KIT CONTENT

  • 1 x ECU Unit with standard plastic box + back cover in aluminium
  • 1 x "Intelligent" change-over switch
  • 1 x pressure sensor type 4+2,5 Absolute
  • 1 x standard loom CA0316
  • 1 x fuse (7,5 A) and fuseholder bag
  • 1 x shrink tube bag (4 cyl)
  • 1 x Wiring diagram
  • Packing: 1 box per kit, 120 box in a carton, 2 cartons per pallet (extra cost will be charged if 1 pallet per carton is needed

Aria 32 - Aria 48 Comparative table[+]

Aria 32 Technical data Aria 48 (OBD)
10 - 16 Volts CC Supply Voltage: 10 - 16 Volts CC
-20 / + 105 °C Working temperature: -20 / + 105 °C

< 20 mA
< 160 mA
Power consumption:
- stand-by (key Off):

- no load ready to change (key On):

< 20 mA
< 160 mA
2, 3, 4 Gas Injectors supported: 2, 3, 4
from 2 to 16 ohms Injectors Impedance: from 2 to 16 ohms
2 (Imax = 4A cad.) Lock-off load on single input: 2 (Imax = 4A cad.)
2 Inputs for lock-off / Services: 2
4,7 - 10 kohm Water temper. sensors supported: 4,7 - 10 kohm
4,7 - 10 kohm Gas temper. sensors supported: 4,7 - 10 kohm
4+2,5 bar Absolute Pressure sensors supported: 4+2,5 bar Absolute
1050 & 806 compatibles, 0-90 ohm
(others on demand)
Level sensors supported:   1050 & 806 compatibles, 0-90 ohm
(others on demand)
0-0,8 / 0-5 / 5-0 / 0,8-1,6 / 2,5-3,5 / UEGO Lambda sensors managed: 0-0,8 / 0-5 / 5-0 / 0,8-1,6 / 2,5-3,5 / UEGO
possible for all managed types Lambda emulation possible for all managed types
Pushbutton, gas level shown, operating led, ready-to-change blinking, diagnostics, Buzzer Change-over Switch: Pushbutton, gas level shown, operating led, ready-to-change blinking, diagnostics, Buzzer
4 poles AMP on the loom for custom USB or Bluetooth interface Interface: 4 poles AMP on the loom for custom USB or Bluetooth interface
none Standard OBD protocols supported: ISO 9141-2
KEYWORD 2000
(5 BAUD and INIT FAST)
CAN STANDARD 250
CAN STANDARD 500
CAN EXTENDED 250
CAN EXTENDED 500